Lauxes Aluminium Next Generation Floor Grate 14(NXT14) Silver 300*100*14mm
Available in multiple depths, this anti-tracking, anodised aluminium grate is ideal for multiple applications. With a Lifetime Rustproof Warranty and no bedding required, the NeXT Generation grates are an industry gamechanger.
$34/100mm
Any size from 300mm.
(300-3000)mm long x 14mm deep x 100mm wide
Color: Silk Silver
4 Waste Sizes: 40/50/72/80mm
No bedding required
For indoor and outdoor use
Easy roll-out feature for cleaning and maintenance
Thick as tile and glue
No tracking
Cutting & Assembly Instructions:
For easy cutting of floor grate, we recommend the use of a compound mitre saw fitted with a multi-material cutting blade 80 tooth or more. A compact drill with a bimetal hole would be adequate to drill the hole for the waste outlet.
1.Cut the bottom tray 3mm shorter than desired length to allow end caps to be fitted
2.Cut the top grate 1mm shorter than the bottom tray to allow for easy roll in of top grate and tidy fit
3.Using the suitable size hole saw for your pop waste, drill out the hole at the required position to align with the waste pipe in the floor
4.Insert the end caps into the bottom tray and secure with a bead of silicone on the inside of the tray
5.Place silicone around the lip of the pop waste and secure to the underside of the bottom tray at the recently drilled hole
Please Note: Our 'Lauxes' shower grates are 'custom cut' to size. As a 'Special Customer' order, item's cannot be returned once they are cut to your
specified size unless there is a manufacturer's fault, defect or stock arrives damaged. It is important to confirm size before placing your order. Thank You!
Available in multiple depths, this anti-tracking, anodised aluminium grate is ideal for multiple applications. With a Lifetime Rustproof Warranty and no bedding required, the NeXT Generation grates are an industry gamechanger.
$34/100mm
Any size from 300mm.
(300-3000)mm long x 14mm deep x 100mm wide
Color: Silk Silver
4 Waste Sizes: 40/50/72/80mm
No bedding required
For indoor and outdoor use
Easy roll-out feature for cleaning and maintenance
Thick as tile and glue
No tracking
Cutting & Assembly Instructions:
For easy cutting of floor grate, we recommend the use of a compound mitre saw fitted with a multi-material cutting blade 80 tooth or more. A compact drill with a bimetal hole would be adequate to drill the hole for the waste outlet.
1.Cut the bottom tray 3mm shorter than desired length to allow end caps to be fitted
2.Cut the top grate 1mm shorter than the bottom tray to allow for easy roll in of top grate and tidy fit
3.Using the suitable size hole saw for your pop waste, drill out the hole at the required position to align with the waste pipe in the floor
4.Insert the end caps into the bottom tray and secure with a bead of silicone on the inside of the tray
5.Place silicone around the lip of the pop waste and secure to the underside of the bottom tray at the recently drilled hole
Please Note: Our 'Lauxes' shower grates are 'custom cut' to size. As a 'Special Customer' order, item's cannot be returned once they are cut to your
specified size unless there is a manufacturer's fault, defect or stock arrives damaged. It is important to confirm size before placing your order. Thank You!
Available in multiple depths, this anti-tracking, anodised aluminium grate is ideal for multiple applications. With a Lifetime Rustproof Warranty and no bedding required, the NeXT Generation grates are an industry gamechanger.
$34/100mm
Any size from 300mm.
(300-3000)mm long x 14mm deep x 100mm wide
Color: Silk Silver
4 Waste Sizes: 40/50/72/80mm
No bedding required
For indoor and outdoor use
Easy roll-out feature for cleaning and maintenance
Thick as tile and glue
No tracking
Cutting & Assembly Instructions:
For easy cutting of floor grate, we recommend the use of a compound mitre saw fitted with a multi-material cutting blade 80 tooth or more. A compact drill with a bimetal hole would be adequate to drill the hole for the waste outlet.
1.Cut the bottom tray 3mm shorter than desired length to allow end caps to be fitted
2.Cut the top grate 1mm shorter than the bottom tray to allow for easy roll in of top grate and tidy fit
3.Using the suitable size hole saw for your pop waste, drill out the hole at the required position to align with the waste pipe in the floor
4.Insert the end caps into the bottom tray and secure with a bead of silicone on the inside of the tray
5.Place silicone around the lip of the pop waste and secure to the underside of the bottom tray at the recently drilled hole